Synergy 9.6 m Concealed Floor System

Acousto-Magnetic (AM)

The Sensormatic Synergy 9.6 m Concealed Floor System delivers exceptional yet discreet Acousto-Magnetic (AM) EAS protection for retail environments with wide exits or open architecture requirements. This system provides merchandise protection for up to 9.6 m (31.5 ft) of coverage with a detection height of up 1.2 m (4 ft); it emits an audible alert to notify store assistants if protected merchandise passes through the detection zone. The installation of this concealed system impacts store operations minimally by eliminating the need for sub-floor excavation. Its thin, flat antenna simplifies the installation process even further by allowing the antenna to mount directly onto the concrete floor, then covering the antenna with flooring material. It is the ideal detection system for locations where pedestal systems or floor excavation is unwanted or prohibited. The optional 3D Overhead Traffic Counting Sensor can be integrated and configured to provide visibility into shopper visits to help drive incremental sales and improve conversion rates.

Retailer Values

• Delivers exceptional protection for wider exits to help maximise flow and optimise floor space
• Enhances loss prevention efforts and increases shopper visibility through network connected storefront alarms and traffic intelligence
• Eliminates costly excavations by installing flooring material directly over thin antenna
• Provides an invisible yet effective AM EAS solution where pedestal systems are unwanted or prohibited
• Enhances the shopper experience and maximises storefront floor space with ‘tags-too-close’ feature
• Helps to reduce shrink by notifying staff of the presence of a jammer device with a distinct audible alarm
   

Product Compatibility Sensormatic
AM Sensors
Synergy Pedestals
Pro-Max
Door-Max
Ranger Receivers
Satellite Receivers
Amorphous Core Receiver
3D Overhead Traffic Counting Sensor
Wireless Device Manager
Wireless Module
Shrink Management as a Service
 

Specifications
AMS3030-A/AL & AMS3031-A/AL
Capacitor Board Enclosure
Length................................47.5 cm (1.55 ft)
Width ................................ 37.8 cm (1.24 ft)
Depth................................... 8.5 cm (3.3 in)
Weight .................................2.4 kg (5.25 lb)
AMS2020-A Antenna
Length of two coils ...........1.98 m (6 ft 5 in)
Width of two coils.........0.925 m (3 ft 03 in)
Height of brackets......... 4.25 mm (0.167 in)
Weight ................................. 7.3 kg (16.1 lb)
 

Power Supply (AMS9060) Electrical
Primary Input
100-120 VAC or 220-240 VAC @ 50-60 Hz
Primary Power Fuse
3.15 A, 250 V, slo-blow, hi-breaking
Current Draw
(120 V) <1.13 Arms
(240 V) < 0.72 Arms
Input Power
(120 V) <82.1 W
(240 V) <90.0 W
 

Transmitter
Operating frequency ........58 kHz (±200 Hz) (sync pulse 56 kHz)
Transmission burst duration............. 1.6 ms
Max. transmission current...........20 A peak
Burst Repetition Rate
......................................90 Hz (1 or 2 ants.)
..................................... 45 Hz (3 or 4 ants.)
............ 45 Hz (1 floor ant. and 2 pedestals)
...........45 Hz (2 floor ants. and 2 pedestals)
Receiver
Centre frequency ..................58 Hz±200 Hz
Floor antenna (Tx/Rx) cable ...4-conductor, shielded, burial-rated
Cap box Tx/Rx cable................ 13 m (40 ft), 4-conductor, shielded, direct-burial, plenum-rated
Cap box comm cable .............. 13 m (40 ft), 4-conductor, shielded, plenum-rated
 

Environmental Constraints
Operating temperature
0°C to 50°C (32°F to 122°F)
Relative Humidity
0 to 90% non-condensing
Enclosure
IPX0
Evaluated for altitudes up to 3200 m
(10500 ft)
 

Declarations
EMC
47 CFR Part 15
RSS 210
Safety 
UL/EN 60950-1
CSA C22.2.60950-1