Synergy 2.4 m Concealed Door or Wall System

 Acousto-Magnetic (AM)

The Sensormatic Synergy 2.4 m Concealed Detection System delivers exceptional yet discreet Acousto-Magnetic (AM) EAS protection for environments that require a high vertical detection zone. This system provides protection up to 1.8 m (6 ft) off the floor and exits up to 2.4 m (7 ft 10 in) wide to maximise customer flow and optimise merchandising floor space. This system requires limited floor cutting for efficient installation. Receiver antennas mount to the door in a self-adhesive cable channel or inside the wall of the doorway. For high-detection performance, the transmitter cable is installed under the floor. If protected merchandise passes through the detection zone, the system emits an audible alert to notify store assistants. The optional 3D Overhead Traffic Counting Sensor can also be integrated and configured to provide visibility into shopper visits to help drive incremental sales and improve conversion rates.

Retailer Values

• Delivers exceptional protection for wider exits to help maximise flow and optimise floor space
• Enhances loss prevention efforts and increases shopper visibility through network connected storefront alarms and traffic intelligence
• Helps to lower the cost of ownership with limited floor cutting at installation
• Maximises storefront floor space with ‘tags-too-close’ feature
• Helps to reduce shrink by notifying staff of the presence of a jammer device with a distinct audible alarm

Product Compatibility
Sensormatic AM Sensors
Synergy Pedestals
Pro-Max
Door-Max
Ranger Receivers
Satellite Receivers
Amorphous Core Receiver
3D Overhead Traffic Counting Sensor
Wireless Device Manager
Wireless Module
Shrink Management as a Service
 

Specifications
AMS3004-A
Cap-board enclosure
Length..............................210 mm (8.25 in)
Width ............................... 271 mm (10.6 in)
Depth.............................83.75 mm (3.29 in)
Weight .................................. 2.1 kg (4.6 lb)
Power supply ............................(AMS9060)
 

Electrical
Primary Input
100-120 VAC or 220-240 VAC 50–60 Hz
Primary Power Fuse
3.15 A, 250 V, slo-blow, hi-breaking
Current Draw
(120 V) <0.29 Arms
(240 V) < 0.24 Arms
Input Power
(120 V) <19.7 W
(240 V) <21.6 W
 

Transmitter
Transmission burst duration............. 1.6 ms
Transmission current...............4.5-14 Ao-p (loop size related)
Burst Repetition Rate
90 Hz with 1 loop
45 Hz for each loop in 2-loop system
Receiver
Centre frequency ................58 kHz±200 Hz
Receiver coil resistance .......... 13 m (40 ft),4-conductor, shielded, direct-burial, plenum-rated
Loop cable .........18 m (60 ft), 2-conductor, shielded, direct-burial rated
Cap box power cable .............. 13 m (40 ft), 2-conductor, shielded, plenum-rated